First Monday
Jobs
Jobs open to youOnly jobs that can hire where you liveA CV for each jobWritten from your record, every line checkedMemoryIt remembers, so you don’t repeat yourselfInterview helpResearch, prep and hints only you seeWatch how it works0:28
FAQDocsUse in AI, Free
Your countryNorth AmericaEuropeAsia-PacificLatin AmericaNot on the list? Tell us where you liveRequest early accessEarly access
First Monday

Remote jobs that can actually hire you.

One email to confirm your address, and another when your group is invited. Free during the beta. By requesting access you agree to the Terms & Conditions and the Privacy Policy.

Beta formacOSWindows

Jobs

Jobs open to you in CanadaRemote jobs in the USRemote jobs in PolandRemote jobs in the UKRemote jobs in CanadaRemote jobs in Mexico

Product

Jobs open to youA CV for each jobMemoryInterview helpHow it works

Company

FAQContact

Legal

Privacy PolicyTerms & Conditions
Jobs
Jobs open to you in CanadaRemote jobs in the USRemote jobs in PolandRemote jobs in the UKRemote jobs in CanadaRemote jobs in Mexico
Product
Jobs open to youA CV for each jobMemoryInterview helpHow it works
Company
FAQContact
Legal
Privacy PolicyTerms & Conditions
Remote jobs by country
United StatesPolandUnited KingdomCanadaMexicoBrazilGermanySpainPortugalIrelandNetherlandsIndiaSwedenBelgiumAustriaDenmarkFinlandSwitzerlandNorwayAustraliaNew Zealand

Remote jobs by country

United StatesPolandUnited KingdomCanadaMexicoBrazilGermanySpainPortugalIrelandNetherlandsIndiaSwedenBelgiumAustriaDenmarkFinlandSwitzerlandNorwayAustraliaNew Zealand
© 2026 First MondayNo tracking cookies. Anonymous page statistics only.
First Monday
Jobs/Operations/Traveling Lead Composite Blade Technician Level 4

Traveling Lead Composite Blade Technician Level 4

GEV Wind Power

Abilene, United States · Harrisburg…OperationsPosted September 9, 2026
Probably open to people in the United States and CanadaApply for this job Write my CV for this job Early access
Pay
Not stated
Required
composite blade repair, Category 4 & 5 composite blade repair, epoxy, polyester resins, balsa, foam, fiberglass reinforcement
Nice to have
GWO BST (Basic Safety Training), OSHA 10 General Industry
Experience
5+ years
Travel
Weekly, up to 100% of the time
Benefits
Health insurance, Dental and vision, Life and disability insurance, Retirement plan
Posted
September 9, 2026
Company
GEV Wind Power

Who it can hire

We read the post for each of the 21 countries we cover.

  • Probably open to people in the US and Canada · Field role

    The post says: “Location: Throughout USA (and potentially Canada) | 100% travel on a rotational basis.”

  • Not open to people in the other 19 countries we cover, as far as the post says.

The job post

GEV Wind Power US is seeking experienced Traveling Lead Composite Blade Technician 4 with extensive Category 4 & 5 composite blade repair expertise. This role involves leading and mentoring teams of technicians while performing high-quality, complex blade repairs up to Category 5, including structural and specialty repairs. The ideal candidate is physically capable, safety-minded, and experienced with composite materials such as epoxy and polyester resins, balsa, foam, and fiberglass reinforcement.

Location: Throughout USA (and potentially Canada) | 100% travel on a rotational basis

Position Type: Full-Time Employee or Contractor

Job Responsibilities:

  • Travel 100% to wind farms throughout North America on an 8/1 rotation.

  • Lead and mentor other technicians on a team with proper composite blade repairs, up to Category 5 complex or specialty repairs

  • Perform expert composite blade repair uptower via platforms, occasionally on the ground, and potentially rope access

  • Perform Epoxy and Polyester resin wet lay up, vacuum infusion, balsa and foam sandwich materials

  • May be required to perform structural repair of blades

  • Complete detailed Daily Progress Reporting Documents and QA/QC reports, adhering to Quality Checkpoints

  • Complete onsite stock checks

  • Demonstrate leadership with team

  • Assisting site lead and project coordinator

We are looking for strong, reliable technicians with the following skillset and training:

  • 5+ years of high-quality composite repair experience performing all types of blade repairs.

  • Knowledge of epoxy and polyester resins, wet lay-up, and vacuum bag techniques.

  • Experience handling balsa and foam core materials.

  • Knowledge of fiberglass reinforcement and structural repair methods.

  • Ability to safely and properly use powered hand tools.

  • Good finger dexterity, including precise use of hand and power tools

  • Understanding of repair specifications, including wind speeds, temperature, and humidity restrictions.

  • Ability to read and interpret complex technical drawings and processes.

  • IT literate, including email, internet, and iPad usage.

  • Ability to work well in a team, take guidance, and provide leadership when required.

  • Experience safely setting up and using 360-degree and 2M basket platforms.

  • Willingness and ability to travel extensively, including by air and ground transportation, often on short notice, and to spend extended periods away from home at project sites.

  • Ability to drive or travel up to 11 hours per day when required.

  • Flexibility to adapt to changes in scope and work assignments.

  • Able to work safely in outdoor environments under both extreme heat and cold conditions.

  • Physically capable of meeting strenuous job requirements, including climbing ladders 2+ times per day up to 300 feet (90 meters), bending, crawling, stooping, and lifting up to 50 pounds.

  • Ability to wear a respirator and work safely with protective equipment

  • Good vision (with corrective lenses if necessary) to perform detailed inspections, read instructions, and safely operate equipment.

  • Valid driver’s license, good MVR report, and must be 21 years of age or older to drive a company vehicle.

  • Valid passport is a plus.

  • Eligible to work in the U.S. or Canada (citizenship or legal work authorization required).

  • Must successfully pass a criminal background check and maintain a drug-free status.

The following certifications are optional and considered a plus:

  • GWO BST (Basic Safety Training) – fire awareness, working at heights, manual handling, first aid

  • GWO Blade Repair or Advanced Blade Repair certification

  • GWO Slinger Signaller or Siemens Rigging Safety

  • IRATA or SPRAT rope access experience and certification is a plus; certificate must be current, and candidate must be physically capable of performing rope access work safely.

  • OSHA 10 General Industry

  • EHS Regional Compliance (preferred; assistance available to obtain certification)

  • SGRE Blade C or Blade D certification (preferred but not required)

  • Spot Paint Certification

  • GE NAM Blade LOTO certificate

What are the perks of working with GEV Wind Power?

  • Health insurance, dental, vision, disability, life, 401(k) match

  • 12 days paid PTO and 11 paid holidays

  • Upskilling trusted GEV technicians via GEV Academy

  • Certification support. GEV keep employees certifications current and support any additional customer-required certifications for onsite work.

  • Bespoke reporting system (time saving with training provided)

  • Streamlined communications for our technicians with regular Business and Project updates via GEV technician engagement platform

A little bit about us:

A Career Enabling You to Make a Global Impact!

You will have heard about the term ‘energy transition’ and perhaps wondered what this means and even how you can get involved. We can see fundamental changes in our daily lives from the electrification of motor vehicles to reducing our dependency on fossil fuels through the increased use of renewable energy sources.

At GEV Wind Power, we are a key part of this transition and proud to be helping in a small way to accelerate the change. Our role is critical in supporting power generation from wind energy, where we are the market leader for maintaining one of the key components, the rotor blades. If the blades become damaged or simply lose their structural integrity through erosion from wind and rain, their efficiency and ability to produce power reduces dramatically. Our job is to ensure the blades keep their profile and are optimum for producing electricity

A career with GEV is taking ownership of the challenges we face globally and personally contributing to a positive future for us all. You will also join a dynamic and team orientated organisation, where the culture is built around collaboration and driving change.

First Monday isn’t the employer or a recruiter and isn’t affiliated with GEV Wind Power. Details may have changed since; confirm with the employer before you apply.

Probably open to people in the United States and CanadaApply for this job Write my CV for this job Early access
Pay
Not stated
Required
composite blade repair, Category 4 & 5 composite blade repair, epoxy, polyester resins, balsa, foam, fiberglass reinforcement
Nice to have
GWO BST (Basic Safety Training), OSHA 10 General Industry
Experience
5+ years
Travel
Weekly, up to 100% of the time
Benefits
Health insurance, Dental and vision, Life and disability insurance, Retirement plan
Posted
September 9, 2026
Company
GEV Wind Power

Similar jobs open to people in the United States

North America Equipment Competitiveness LeaderGE Vernova · Remote · USSite Activation LeadLeidos · Remote · USCField Manager, Fiber ConstructionConcordia Group · United StatesTechnical TrainerGenetec · Chicago, United States · United States…
First Monday

Get jobs like this every Monday.

One email a week with new remote jobs open to people in Canada. Free, and one click to unsubscribe. Privacy Policy

Or request early access to the app
Apply for this job